• Juxing Equipment

How to Source a Chicken Feet Skin Peeling Machine for Your Plant

  • Home
  • How to Source a Chicken Feet Skin Peeling Machine for Your Plant

Nov . 17, 2026 00:16 Back to list

How to Source a Chicken Feet Skin Peeling Machine for Your Plant

Choose between the YZ-YTM60 and YZ-YTM80 by matching their capacity, utilities, footprint, and weight to your processing line. Confirm peeling results on representative chicken feet, then settle order quantity, delivery, packing, and supplier documents before placing the order.

How to Source a Chicken Feet Skin Peeling Machine for Your Plant
Illustration for reference; see the product page for actual photos and specifications.

380V

Voltage

3kw

Power

201 stainless steel

Material

150kg/h

Capacity

Our chicken feet skin peeling machine removes the outer yellow skin, nails, and membrane from chicken feet. The two model options use 201 stainless steel and suit food processing plants, hotels, and restaurants. Your purchase decision starts with the material flow and installation space at your plant.

Match the model to your line

Use the YZ-YTM60 when its 150kg/h capacity fits your incoming volume and its footprint fits the installation area. The YZ-YTM80 provides 200kg/h and needs the larger footprint shown below. Measure the route from unloading to the machine and the clearance around the installation point before confirming the model.

ParameterYZ-YTM60YZ-YTM80
Voltage380V380V
Power3kw4kw
Material201 stainless steel201 stainless steel
Capacity150kg/h200kg/h
Dimension1.10.60.85m1.30.80.9m
Weight150kg160kg

Confirm peeling quality with a sample

A sample run should use the chicken feet, preparation condition, and batch handling method expected in production. Check removal of yellow skin, nails, and membrane, the condition of the underlying flesh, and the amount of impurities or hair remnants after processing.

The machine uses a rotating barrel, soft brushes, and rubber fingers. A water sprayer flushes impurities and hair remnants during processing. Ask us to identify normal adjustment and cleaning points, then record the sample result against your acceptance criteria.

Inspect smooth accessible surfaces, secure covers, sound welds, and clean water and product paths on the machine supplied for approval. Confirm which parts contact the product and how replacement brush or cutter parts are identified.

Confirm utilities, space, and receiving arrangements

Confirm that your site can provide 380V before ordering. Check the selected model's dimensions against available floor area, then plan space for loading chicken feet, collecting processed product, water handling, cleaning, and operator access.

For shipping, ask for packed dimensions, packed weight, package type, lifting points, moisture protection, and package marking. Request a packing list identifying the machine, loose parts, accessories, and spare parts. Compare that list with the commercial invoice and physical shipment at arrival, and photograph package and machine condition if your receiving procedure requires an arrival record.

Set quantity and delivery expectations in the quotation

Ask us to quote the minimum order quantity for the selected model and whether a sample or trial unit can be ordered separately. Confirm whether the quoted quantity applies to one model or can combine model options. Ask how spare brushes, cutters, and other wear parts are handled in the order.

Request the production lead time from order confirmation, the point at which lead time starts, and events that can change the schedule. Your inquiry should also ask for quotation validity, price basis, payment terms, shipping term, destination-port assumptions, and insurance responsibility. Keep these commercial points separate from the technical acceptance criteria.

Request approval and shipping documents

Request a current specification sheet or quotation identifying the exact model and parameters in the table. Ask for a general arrangement drawing showing connection points, working clearances, and lifting or handling points.

Before shipment, request operating, cleaning, and maintenance instructions, a spare-parts list, and a packing list. If your internal approval process requires inspection, ask for a factory test or pre-shipment inspection record tied to the machine model and serial number. Request any food-contact, electrical, or safety certificates required by your destination and product-use rules, and verify that each document names the supplied configuration.

Evaluate the supplier against the order

Compare the supplier's model number and parameter sheet with the sample machine. Ask for clear answers to utility and installation questions, and require written agreement on the acceptance criteria for peeling quality.

Check whether the supplier can identify replacement parts, explain cleaning and routine maintenance, and support the packing and shipping documents your receiving team needs. If your procurement process requires application references, compare them against the same capacity, material, and installation conditions.

Before you order

Choose the model after checking incoming volume, 380V supply, floor space, and cleaning access. Run representative chicken feet and define acceptable peeling and residue results in writing. Ask for MOQ, lead time, price basis, payment terms, shipping terms, packaging, and required certificates in the quotation; treat these as order questions until confirmed.

Before you approve the sample

Model fitcompare capacity, power, dimensions, weight, and site voltage
Sample resultrecord skin, nail, membrane, flesh, and residue results
Build qualityinspect 201 stainless steel, welds, covers, and product paths
Receiving planmatch packed details, package marks, and packing list
Supplier responserequire written model, acceptance, spare-parts, and maintenance details

Documents to prepare

Current specification sheet or quotation with exact model and parameters
General arrangement drawing with clearances, connections, and lifting points
Operating, cleaning, maintenance, and spare-parts instructions
Packing list identifying the machine, loose parts, accessories, and spares
Inspection record tied to the supplied model and serial number
Destination-required electrical, food-contact, or safety certificates

Prepare the purchase inquiry

Send us your target model, incoming chicken-feet volume, sample requirements, site voltage, installation space, destination, requested order quantity, and required documents. Ask for one quotation with the technical configuration, packing details, minimum order quantity, lead time, commercial terms, and acceptance process clearly separated.

The company

Anping County Yize Metal Products Co., Ltd.

Anping County Yize Metal Products Co., Ltd. was founded in 1999,it is a modern enterprise integrating R&D, production, and sales. Its headquarters are located in Anping County, “the hometown of wire mesh in China".Yize company’s main products are cage series, poultry equipment, wire mesh fences, livestock equipment, perforated metal mesh, expanded metal mesh, breeding mesh, protective mesh series, chain link fences, field fences, stainless steel wire, stainless steel wire mesh, gabion box, welded wire mesh, barbed…

About Us ↗Visit company website ↗
Share

Next:

This is the last article

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.