English
  • Juxing Equipment

All-in-One Feed Miller with Mixer | Efficient & Durable

  • Home
  • All-in-One Feed Miller with Mixer | Efficient & Durable

Oct . 11, 2025 09:15 Back to list

All-in-One Feed Miller with Mixer | Efficient & Durable

Vertical animal feed mixer with grinder: field notes from real barns and busy mills

A feed miller with mixer sounds tidy on paper, but out on the yard it’s about reliability, even on muddy Mondays. The unit I’ve been watching closely is a compact vertical system with an integrated grinder from Yize Machine (Origin: Jinwang Western Street, Industrial Zone, Anping County, Hengshui, Hebei, China). It leans into a dynamic tumbling action and a staggered left/right configuration—more on that in a moment. Honestly, the first thing I noticed was how quickly it reaches a consistent blend.

All-in-One Feed Miller with Mixer | Efficient & Durable

Industry snapshot

Trends are clear: tighter CV (coefficient of variation) targets, lower kWh per ton, dust control that doesn’t choke filters, and smarter dosing—even on small farms. To be honest, people want plug-and-play without the engineering headaches. This vertical system hits that niche with a surprisingly small footprint and straightforward maintenance.

How the machine works (and why it mixes fast)

The heart of this feed miller with mixer is the rotational throwing structure that lifts material up the column and lets it cascade—classic dynamic tumbling. The left/right staggered layout prevents dead zones, so micronutrients don’t “hide.” In short, it moves feed both vertically and laterally, which is why many customers say it gets uniform fast.

All-in-One Feed Miller with Mixer | Efficient & Durable

Representative specifications (real‑world use may vary)

Model Batch capacity ≈ Mixer motor Grinder motor Mixing time Uniformity (CV)
YZ-V500 500 kg/batch 5.5 kW 7.5 kW 6–8 min ≤10% (salt test)
YZ-V1000 1000 kg/batch 7.5 kW 11 kW 7–9 min ≤8–10%
YZ-V2000 2000 kg/batch 11 kW 15 kW 8–10 min ≤8–10%

Notes: CV via sodium-chloride tracer; ISO 6497/6498 sampling; expected service life ≈ 8–12 years with routine wear-part swaps.

All-in-One Feed Miller with Mixer | Efficient & Durable

Process flow and testing

  • Materials: corn, wheat, soybean meal, premix, salt, additives.
  • Method: magnet check → grinding → dosing/weighing → vertical mixing (tumbling + staggered throw) → discharge/bagging.
  • Quality: salt test CV target ≤10%; sampling per ISO 6497; prep per ISO 6498.
  • Safety: CE-conforming guards; dust ports for baghouse; optional magnets and screens.
All-in-One Feed Miller with Mixer | Efficient & Durable

Where it’s used

Poultry, dairy, swine, and aquaculture pre-mix lines; on-farm rations; satellite mills needing fast changeovers. Advantages? Compact footprint, quick uniformity, and simpler wiring—actually helpful in retrofits.

Vendor comparison (quick take)

Vendor Origin Capacity range Certifications Lead time ≈ Notes
Yize Machine China 0.5–2.0 t/batch CE, ISO 9001 3–6 weeks Dynamic tumbling + staggered design
SKIOLD Denmark Farm–industrial CE 6–10 weeks Strong automation packages
Van Aarsen Netherlands Industrial scale CE 10–20 weeks High throughput lines
All-in-One Feed Miller with Mixer | Efficient & Durable

Customization and options

  • 304 stainless contact parts; wear liners for abrasive rations.
  • Load cells, VFDs, basic PLC/HMI, remote support.
  • Cyclone or baghouse, rotary magnet, screw/auger discharge, bagging scale.

Field results (short cases)

  • Poultry co-op, 1 t batches: salt test CV 7.2%; kWh/t down ~18% vs. prior setup; 9-minute turnaround.
  • Dairy farm, 500 kg batches: premix dispersion improved (observed micro-additive recovery within ±10%); dust complaints dropped after fitting a small cyclone.

Feedback is candid: “It’s quick to clean between recipes,” one manager told me, “and—surprisingly—the grinder doesn’t bridge when corn is a bit damp.” I guess that staggered geometry helps more than it looks on CAD.

All-in-One Feed Miller with Mixer | Efficient & Durable

Certifications and standards

CE compliance, optional ISO 9001:2015 QMS at the plant. Sampling per ISO 6497; sample prep per ISO 6498. Many buyers also align with GMP+ or FAMI-QS for feed safety—wise move.

Authoritative citations

  1. ISO 6497:2002 Animal feeding stuffs — Sampling.
  2. ISO 6498:2012 Animal feeding stuffs — Guidelines for sample preparation.
  3. AFIA (American Feed Industry Association), Feed Manufacturing Technology (latest ed.).
  4. FAO, Manual on feed manufacturing and quality control.
  5. Directive 2006/42/EC (EU Machinery Directive) for CE marking.
Share

Next：

Latest news

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Hit enter to search or ESC to close